PRODUCTS

MESSAGE

Submit

‹

›

‹

  • Brand New 2TR 2tr-fe Engine 2.7L Gasoline Car Engine for Toyota Prado / Hiace / Land Cruiser Costa Runner Coaster Hilux
  • Brand New 2TR 2tr-fe Engine 2.7L Gasoline Car Engine for Toyota Prado / Hiace / Land Cruiser Costa Runner Coaster Hilux
  • Brand New 2TR 2tr-fe Engine 2.7L Gasoline Car Engine for Toyota Prado / Hiace / Land Cruiser Costa Runner Coaster Hilux
  • Brand New 2TR 2tr-fe Engine 2.7L Gasoline Car Engine for Toyota Prado / Hiace / Land Cruiser Costa Runner Coaster Hilux
  • Brand New 2TR 2tr-fe Engine 2.7L Gasoline Car Engine for Toyota Prado / Hiace / Land Cruiser Costa Runner Coaster Hilux

›

Brand New 2TR 2tr-fe Engine 2.7L Gasoline Car Engine for Toyota Prado / Hiace / Land Cruiser Costa Runner Coaster Hilux

The 2TR engine adopts an in-line four-cylinder, water-cooled, double overhead camshaft (DOHC) structural design, equipped with an advanced electronically controlled fuel injection system and an intelligent ignition system. The core displacement is 2693ml (2.7L), which can output a maximum power of 118kW/5200rpm and a peak torque of 244Nm/3800rpm, with a compression ratio of 9.6:1. Its power tuning focuses on low-speed and high-torque output, and can release abundant torque in the speed range of 1500-3500rpm. Whether it is heavy-load climbing, off-road rescue, urban commuting or long-distance transportation, it can provide a steady stream of power support, covering a variety of harsh usage scenarios.
In terms of balancing reliability and economy, the engine adopts a classic combination of a high-strength cast iron cylinder block and an aluminum alloy cylinder head, which not only ensures the rigidity and impact resistance of the engine block, but also optimizes heat dissipation efficiency; combined with the timing chain drive design, it greatly reduces the frequency and cost of later maintenance. At the same time, the engine integrates advanced combustion control technology, which effectively improves fuel utilization rate, reduces exhaust emissions, can stably meet the National V and above emission standards, and takes into account environmental protection needs and economic efficiency in use.

II. Brand-New Full-Part Assembly, Quality Traceable and Controllable

This 2TR engine is assembled with 100% brand-new original factory specification parts, following Toyota's original factory production standards and strict quality control processes throughout. From the selection of core parts such as cylinder blocks, cylinder heads, crankshafts and pistons, to each process such as precision cleaning, precise assembly and sealing performance testing, every step is operated by experienced professional technicians and multi-dimensionally verified by intelligent testing equipment to ensure that the fit gap between parts is accurate to the micron level, completely eliminating assembly deviations and quality hazards. After assembly, the engine also needs to undergo comprehensive tests such as overall air tightness, oil circuit pressure and circuit communication to ensure product quality and consistency with the original factory from the source, allowing you to obtain a "brand-new original factory-level" power core.

III. Professional Hot Running-In Test, Stable Power Ready

To ensure that the engine reaches the best operating state after assembly, each 2TR brand-new assembled engine undergoes a standardized professional hot running-in test process. According to the engine running-in technical specifications, on the basis of cold running-in, the engine completes deep running-in in a high-temperature environment by simulating actual working conditions, so that key moving parts such as piston rings, bearings and camshafts are fully adapted to form a close-fitting relationship, effectively improving sealing performance and compression efficiency, and reducing later operation wear. During the test, technicians real-time monitor core parameters such as speed, temperature and oil pressure to ensure that all indicators are within the normal range. The engine after professional hot running-in starts more smoothly, runs more stably, and has more stable power output. At the same time, it can reduce initial oil consumption and extend service life, allowing you to enjoy mature and reliable power performance immediately without going through a long running-in period.

IV. Wide Range of Applicable Models, Precise Matching with Original Factory

This 2TR brand-new assembled engine precisely matches the original factory specifications, and the applicable models cover multiple categories such as hard-core off-road vehicles, commercial vehicles and pickups. The core applicable models include: Toyota Land Cruiser Prado (LC120/LC150 series), Toyota Hilux, Toyota Hiace, Toyota Tacoma, Toyota Fortuner, etc.; in terms of domestic models, it is suitable for authorized models such as Brilliance Jinbei Grace and Jinbei Grand Hiace Toyota power version, and can also be compatible with relevant special operation vehicles built on the Toyota IMV platform, fully meeting the power replacement and upgrade needs of different users.

V. One-Year Quality Assurance Commitment, Worry-Free Use

We deeply understand the importance of the reliability of the power core, so we provide a one-year quality assurance service for this 2TR brand-new assembled engine. During the quality assurance period, if the engine malfunctions due to manufacturing or assembly quality problems, we will provide free maintenance or parts replacement services. A professional technical team will follow up the whole process to quickly respond to after-sales needs and minimize your use risks. From parts selection to assembly testing, from sales to after-sales guarantee, the strict control of every link is only to let you get a more reliable and reassuring power experience.
Inquiry
Email
Features of HIRATE engine：

·Brand new
·100%tested
·Provide visual hot running test service
·12 months warranty period
·Thermal test time 80 minutes
·Equipped with free OEM quality oil filter, intake manifold gasket and exhaust manifold gasket
·Strong and protective packaging
·Clients can represent brands

Why choose Hirate engine?

·Focus on Japanese and Korean automobile engines: We are a professional Japanese and Korean automobile engine manufacturer with 18 years of experience, a professional engine technology research and development team. At present, we manufacture engines for Hyundai, Kia, Toyota, Nissan and other Japanese and Korean series cars. The level is already at the top in China
·Use oem quality parts：We have always insisted on using original parts and oem quality parts to assemble the engine. The quality of the parts themselves can ensure the service life of the engine and reduce the failure rate.
·Long time hot running-in test：Each exported engine has been hot-run for more than 80 minutes to allow the engine to achieve sufficient thermal run-in. At the same time, we will conduct a thorough inspection of the engine.
·Provide visual hot running test service：We can provide customers with hot running-in tested videos of each engine they ordered, customers can remotely check the status of the running engine
·Excellent after-sales service and quality assurance: We have a professional after-sales department. When the engine fails, the after-sales department will respond as soon as possible. If the loss is caused by the Engine quality, we will propose compensation measures and protect customers to the greatest extent possible rights and interests

Products Recommended 

WeChat：X17862928012